Welcome to the CatFlap project
News
Watch out! Yoja reported that the newer hardware-revision of the PetPorte SmartFlap PCB does not work with the Firmware! (See this topic). More...
Vorsicht! Yoja hat berichtet dass die neuere Hardware der PetPorte SmartFlap Platine nicht mehr mit der Firmware funktioniert! (Siehe Forum). Mehr...
- Version 0.95-beta released:
This project is about developing a new firmware for a PetPorte SmartFlap, which will send information to a PC via a serial interface.
Bei diesem Projekt geht es darum eine neue Firmware für eine PetPorte SmartFlap zu entwickeln, welche Informationen über die serielle Schnittstelle zu einem PC schickt.
Attention: Once changes are made to the cat flap, there is no turning back, the old software can not be recovered. Also you void the warranty.
Achtung: Sobald Veränderungen an der Katzenklappe vorgenommen wurden, gibt es keinen Weg zurück mehr, die alte Software kann nicht mehr wiederhergestellt werden. Außerdem erlischt vermutlich die Garantie.
- Hardware
- Remove cover and unmount PCB / Platine ausbauen
- PCB and connections description / Beschreibung der Platine und Leiterbahnen
- Solder programming connector and cable / Programmierstecker und Kabel löten
- Optional: Add a flap position sensor / Optional: Klappen-Positionsgeber einbauen
- Add serial interface / Serielle Schnittstelle einbauen
- Assemble the cat flap and tune antenna / Zusammenbauen und Antenne einstellen
- Firmware
Attention: I take no liability for damages caused by the modification of the cat flap.
Achtung: Ich übernehme keine Haftung für Schäden die durch den Umbau an der Katzenklappe entstehen.
